Deploy Windows SharePoint Services version 3 on a single server
|
|
This content is preliminary content for a preliminary software release. It might be incomplete and is subject to change. |
Note: You can publish a working SharePoint site in just minutes by deploying Microsoft Windows SharePoint Services on a single server computer. A single-server configuration is useful if you want to evaluate Windows SharePoint Services features and capabilities, such as collaboration, document management, and search, but you do not want to spend a lot of time installing components and configuring settings. A single-server configuration is also useful if you are deploying a small number of Web sites and you want to minimize administrative overhead. When you deploy Windows SharePoint Services on a single server using the default settings, the Setup program automatically installs and configures Microsoft Windows Internal Database, and uses it to create the configuration database and content database for your SharePoint site. In addition, the Setup program installs SharePoint Central Administration and creates your first SharePoint site.
In this article:
| • | |
| • | |
| • | |
| • |
Install and configure Windows SharePoint Services with Windows Internal Database |
| • |
After you install and configure Windows SharePoint Services with Windows Internal Database |
Hardware and software requirements
Before you install and configure Windows SharePoint Services, make sure your server computer has the recommended hardware and software. For a single-server deployment, your server computer must meet the following hardware and software requirements.
Hardware requirements
| • |
A dual-processor computer with processor clock speeds of 2.5 gigahertz (GHz) or higher. A minimum of 1 gigabyte (GB) of RAM; however, 2 GB of RAM is recommended for improved performance. |
Software requirements
| • |
A computer running Microsoft Windows Server 2003 (Standard, Enterprise, Datacenter, or Web Edition) with Service Pack 1 (SP1), Microsoft Windows Workflow Foundation Runtime Components Beta 2.2 (Build 3807.7), and Microsoft .NET Framework 2.0. Instructions for installing the Windows Workflow Foundation Beta 2.2 and Microsoft .NET Framework 2.0 are provided later in this section. For more information about Microsoft .NET Framework 2.0, see the Microsoft .NET Framework Developer Center . For more information about the Windows Workflow Foundation Runtime Components Beta 2.2, see the Windows Workflow Foundation Web site . |
| • |
The computer must be configured as a Web server running Microsoft Internet Information Services (IIS) in IIS 6.0 worker process isolation mode. Instructions for installing and configuring IIS are provided later in this section. For more information about IIS , see the Windows Server 2003 documentation. |
| • |
The computer must be using the NTFS file system. Windows Server 2003 includes a conversion utility (Convert.exe) that you can use to convert an existing file allocation table (FAT) volume to NTFS without losing data. |
In addition to these requirements, you must install Windows SharePoint Services on a clean installation of Windows Server 2003. If you uninstall a previous version of Windows SharePoint Services, and then install Windows SharePoint Services (Beta 2), Setup might fail to create the configuration database and the installation process will fail.
|
|
You cannot install Windows SharePoint Services on a single server that is running Windows Server 2003, Web Edition. |
Security account requirements
To install Windows SharePoint Services on a stand-alone server, you must be a member of the Administrators group on the computer, or you must be a member of a group that is a member of the Administrators group on the computer, such as the Domain Admins group.
Configure the server as a Web server
Before you install and configure Windows SharePoint Services , you must install and configure the required software on each of your front-end servers. This includes installing and configuring IIS so your front-end servers act as Web servers, installing Windows .NET Framework 2.0, enabling ASP.NET 2.0, and installing Windows Workflow Foundation Runtime Components Beta 2.2 (build 3807.7).
Install and configure IIS
IIS is not installed or enabled by default in Windows Server 2003. To make your server a Web server, you must install and enable IIS, and you must make sure that IIS is running in IIS 6.0 worker process isolation mode.
|
1. |
Click Start, point to All Programs, point to Administrative Tools, and then click Configure Your Server Wizard. | ||
|
2. |
On the Welcome to the Configure Your Server Wizard page, click Next. | ||
|
3. |
On the Preliminary Steps page, click Next. | ||
|
4. |
On the Server Role page, click Application server (IIS, ASP.NET), and then click Next. | ||
|
5. |
On the Application Server Options page, click Next. | ||
|
6. |
On the Summary of Selections page, click Next. | ||
|
7. |
Click Finish. | ||
|
8. |
Click Start, point to All Programs, point to Administrative Tools, and then click Internet Information Services (IIS) Manager. | ||
|
9. |
In the IIS Manager tree, click the plus sign (+) next to the server name, and then right-click the Web Sites folder and select Properties. | ||
|
10. |
In the Web Sites Properties dialog box, click the Service tab. | ||
|
11. |
In the Isolation mode section, clear the Run WWW service in IIS 5.0 isolation mode check box, and then click OK.
|
Install Windows .NET Framework 2.0
|
1. |
Do one of the following:
|
Enable ASP.NET 2.0
|
1. |
Click Start, point to All Programs, point to Administrative Tools, and then click Internet Information Services (IIS) Manager. |
|
2. |
In the IIS Manager tree, click the plus sign (+) next to the server name, and then click the Web Service Extensions folder. |
|
3. |
In the details pane, click ASP.NET v2.0.50727, and then click Allow. |
Install Windows Workflow Foundation Runtime Components Beta 2.2
Go to the Microsoft Download Center Web site , and on the Microsoft Windows Workflow Foundation Runtime Components Beta 2.2 and Visual Studio® 2005 Extensions for Windows Workflow Foundation Beta 2.2 page, follow the instructions for downloading and installing Windows Workflow Foundation Runtime Components Beta 2.2 (build 3807.7). There are separate downloads for x86-based computers and x64-based computers: be sure to download and install the appropriate version for your computer.
Install and configure Windows SharePoint Services with Windows Internal Database
Because you are installing to a single server, you can run the Setup program using the Basic option. This option uses the Setup program's default parameters to install Windows SharePoint Services and Windows Internal Database.
Run Windows SharePoint Services Setup
|
1. |
From the product disc, run Setup.exe, or from the product download, run Sharepoint.exe. |
|
2. |
On the Read the Microsoft Software License Terms page, review the terms, select the I accept the terms of this agreement check box, and then click Continue. |
|
3. |
On the Choose the installation you want page, click Basic. |
|
4. |
When Setup finishes, a dialog appears telling you that you must complete the configuration of your server. Make sure that the Run the SharePoint Products and Technologies Configuration Wizard now check box is selected. |
|
5. |
Click Close to start the configuration wizard. |
Run the SharePoint Products and Technologies Configuration Wizard
|
1. |
On the Welcome to SharePoint Products and Technologies page, click Next. | ||||
|
2. |
In the warning dialog box notifying you that some services might need to be restarted or reset during configuration, click Yes. | ||||
|
3. |
On the Configuration Successful page, click Finish , and your new SharePoint site should open.
|
Add the SharePoint site to the list of trusted sites
|
1. |
In Internet Explorer, on the Tools menu, click Internet Options. |
|
2. |
On the Security tab, in the Select a Web content zone to specify its security settings box, click Trusted Sites, and then click Sites. |
|
3. |
Clear the Require server verification (https:) for all sites in this zone check box. |
|
4. |
In the Add this Web site to the zone box, type the URL to your site, and then click Add. |
|
5. |
Select the Require server verification (https:) for all sites in this zone check box. |
|
6. |
Click Close to close the Trusted Sites dialog box. |
|
7. |
Click OK to close the Internet Options dialog box. |
Configure user authentication settings for trusted sites
|
1. |
In Internet Explorer, on the Tools menu, click Internet Options. |
|
2. |
On the Security tab, in the Select a Web content zone to specify its security settings box, click Trusted sites, and then click Custom Level. |
|
3. |
In the Settings list box, under User Authentication, click Automatic logon with current username and password. |
|
4. |
Click OK twice. |
|
|
If you do not want to add your SharePoint site to the list of trusted sites, but you do not want to be prompted for your user name and password every time you access your SharePoint site, you can instead add your SharePoint site to the Local intranet zone. If you do this, you must enable the Automatic logon only in Intranet zone user authentication setting instead of the Automatic logon with current username and password user authentication setting. |
Configure proxy server settings to bypass the proxy server for local addresses
|
1. |
In Internet Explorer, on the Tools menu, click Internet Options. |
|
2. |
On the Connections tab, in the Local Area Network (LAN) Settings area, click LAN Settings. |
|
3. |
In the Proxy Server area, select the Bypass proxy server for local addresses check box. |
|
4. |
Click OK to close the Local Area Network (LAN) Settings dialog box. |
|
5. |
Click OK again to close the Internet Options dialog box. |
After you install and configure Windows SharePoint Services with Windows Internal Database
After Setup finishes, your browser window should be open to the home page of your new SharePoint site. Although you can start adding content to the site and you can start customizing the site, it is recommended that you perform the following administrative tasks using SharePoint Central Administration:
| • |
Configure incoming e-mail settings You can configure incoming e-mail settings so that SharePoint sites accept and archive incoming e-mail. You can also configure incoming e-mail settings so that SharePoint sites can archive e-mail discussions as they happen, save e-mailed documents, and show e-mailed meetings on site calendars. In addition, you can configure the SharePoint Directory Management Service to provide support for e-mail distribution list creation and management. |
| • |
Configure outgoing e-mail settings You can configure outgoing e-mail settings so that your Simple Mail Transfer Protocol (SMTP) server sends e-mail alerts to site users and notifications to site administrators. You can configure both the "From" e-mail address and the "Reply" e-mail address that appears in outgoing alerts. |
| • |
Create SharePoint sites When Setup finishes you have a single Web application that hosts a single SharePoint site. You can create more SharePoint sites and Web applications if your site design requires multiple sites or multiple Web applications. |
| • |
Configure diagnostic logging settings You can configure several diagnostic logging settings to help with troubleshooting. This includes enabling and configuring trace logs, event messages, user-mode error messages, and Customer Experience Improvement Program events. |
| • |
Configure antivirus protection settings You can configure several antivirus settings if you have an antivirus program that is designed for Windows SharePoint Services. Antivirus settings allow you to control whether documents are scanned on upload or download and whether users can download infected documents. You can also specify how long you want the antivirus program to run before it times out and you can specify how many execution threads the antivirus program can use on the server. |
Configure administrative settings using SharePoint Central Administration
|
1. |
Click Start, point to All Programs, point to Administrative Tools, and then click SharePoint 3.0 Central Administration. |
|
2. |
On the Central Administration home page, under Administrative Tasks, click the administrative task you want to perform. |
|
3. |
On the Administrative Tasks page, next to Action, click the task. |
'쉐어포인트' 카테고리의 다른 글
| Windows SharePoint Services 3.0 Language Pack - 한국어 (0) | 2007/06/01 |
|---|---|
| Windows SharePoint Services 3.0 (0) | 2007/06/01 |
| Deploy Windows SharePoint Services version 3 on a single server (0) | 2007/06/01 |
| SharePoint 제품 및 기술을 위한 사용자 지정 웹 서비스 작성 (0) | 2007/06/01 |
| SharePoint Portal Server 2001과 공존할 수 없는 프로그램 (0) | 2007/06/01 |
| Windows SharePoint Services설치하기 위한 환경만들기(1) (0) | 2007/06/01 |
쉐어포인트
최근에 달린 댓글
링크
최근에 받은 트랙백
태그목록